Parker Fitting Assembly & Remake Instructions

1. Parker instrument tube fittings are sold completely assembled and ready for immediate use. Simply insert the tube as illustrated until it bottoms in the fitting body. (If the fitting is disassembled, note that the small tapered end of the ferrule(s) go into the fitting body.)

2. Tighten nut finger tight. Then tighten nut with wrench an additional 3/4 or 1-1/4 turns indicated at left. Hold Parker fitting body with a second wrench to prevent body from turning. It is helpful to mark the nut to facilitate counting the number of turns.

For maximum number of remakes, mark the Parker fitting and nut before disassembly. Before retightening, make sure the assembly has been inserted into the fitting until the ferrule seats in the fitting. Retighten the nut by hand. Rotate the nut with a wrench to the original position as indicated by the previous marks lining up. (A noticeable increase in mechanical resistance will be felt indicating the ferrule is being re-sprung into sealing position.)

Only after several remakes will it become necessary to advance the nut slightly past the original position. This advance (indicated by B) need only be 10° - 20° (less than 1/3 of a hex flat).

Parker A-Lok/CPI® Tube Fitting part numbers use symbols to identify the size, style, and material. Tube and pipe thread sizes begin with a number indicating their size in sixteenths of an inch. For example, 4=4/16” or 1/4”; 16=16/16” or 1".

NOTE: Lubrication on the nut is REQUIRED for proper assemblyon all LARGER size fittings in both inch and metric sizes.  This requirement applies to:

• inch sizes of 20 and higher
• metric sizes of 25 and higher

Gaugeability Instructions*

1. From “finger tight” position, wrench 1-1/4 turns for 1/4" to 1" size fittings (6mm to 25mm) (1/16", 1/8", 3/16", 2mm, 3mm and 4mm size tube fittings only wrench 3/4 turn from finger tight position). Hold fitting body hex with second wrench to prevent body from turning as you tighten. It is a good idea to mark the nut (scribe or ink) to help you count the turns.

2. Now select the proper size inspection gauge and try to place it, as shown, between the nut and the body hex. If gauge DOES NOT FIT AT ANY POINT between them, you have correctly tightened the nut. If you can slip the gauge into the space, the fitting is not properly made up, and you must repeat the assembly procedure.

*For initial make up only.



If you would like more information about Parker A-lok/ CPI Instrumentation Tube Fittings or other Parker Products please contact Forberg Scientific Inc Customer Service.
Toll Free: 855-288-5330
Email: mechanicalsales@forberg.com

Cost-Effective Solution for Industrial Instrumentation Applications

Parker’s New Carbon Steel Hand Valves and Manifolds Offer a Cost-Effective Solution for Industrial Instrumentation Applications

 Parker Hannifin Corporation is now offering hand valves and two-, three- and five-valve manifolds in carbon steel, a more economical material than stainless steel. Developed by Parker's Instrumentation Products Division (IPD), the new series provides an ideal solution for natural gas transmission lines, as well as other chemical/petrochemical and power industrial instrumentation applications that don't require the extreme performance of stainless steel.

The new carbon steel hand valves and manifolds are pressure-rated up to 6,000 psig (414 bar) to provide system flexibility when selecting process valves for a variety of applications. They are designed to work with Parker's industry-leading A-LOK® and CPI™ fittings, as well as other manufacturers' products. An external adjustable gland allows for full adjustment of the stem packing without removal of the valve from the system. Handles are color-coded to quickly and easily identify valve functions – including test/drain, equalize, and isolate – thereby avoiding errors and increasing safety.

"Our new carbon steel hand valves and manifolds meet a clear customer need by providing a cost-effective option for applications that don't demand the extreme performance of steel," commented Kevin Burke, Parker IPD Marketing Manager. "Additionally, local assembly and testing in Texas mean customers can count on receiving excellent customer service and product availability."

Catalogs

Catalog 4190-HV (hand valves)

Catalog 4190-PM (two-valve manifolds)

Catalog 4190-FM (three- and five-valve manifolds)

For more information regarding Parker's new carbon steel hand valves and manifolds or other Parker Instrumentation products please contact Forberg Scientific customer service. 

Toll Free: 855-288-5330

Email: mechanicalsales@forberg.com